Home  PRODUCTS  Steel industry  Strip  Conti. annealing lines 

Heat treatment furnace facilities for the steel industry

Continuous annealing facilities for uncoated and coated steel strip

FLEXIBILE AND INNOVATIVE SOLUTIONS FOR GALVANIZING, GALVANNEALING AND TINPLATING USING CONTINUOUS STRIP ANNEALING LINES.

These furnaces are used in galvanizing lines (CGLs) and continuous annealing lines (CALs), and can be radiant tube heated or gas-fired with a muffle.

Well-established technologies have been refined by EBNER for both the annealing furnaces and the coolers - e.g. the patented HICON® jet cooler.

All furnace types feature only components manufactured by or approved by EBNER. This includes burners, radiant tubes, control valves for the combustion system, heat-resistant material for muffles, hot bridles, insulating materials etc.

Applications:

  • Furnaces for continuous galvanizing lines (CGL) for automotive steel strip up to 2100 mm wide
  • Continuous annealing lines (CAL) for automotive steel strip up to 2100 mm wide
  • Continuous annealing lines (CAL) for metallically-coated strip

Mini CAL (horizontal) to anneal deep-drawing grades, polyphase steels and special grades

One annealing line - three technologies

  • Recrystallization
  • Dual-phase cycles
  • Normalizing

Thanks to hydrogen cooling technology, cooling gradients of 100 to 150 K/s are achieved while heat treating polyphase steels and IF grades.

Strip with a max. width of up to 800 mm for a variety of applications in the white goods, electrical and automotive industries can be annealed in the horizontal facilities at throughputs up to 1.3 t/h.

Continuous annealing lines

Galvanizing line
Hot-dip galvanizing facility
CGL
CGL furnace
CAL
HICON® continuous annealing line

Heat treatment furnace facilities for the steel industry

Continuous annealing facilities for uncoated and coated steel strip

FLEXIBILE AND INNOVATIVE SOLUTIONS FOR GALVANIZING, GALVANNEALING AND TINPLATING USING CONTINUOUS STRIP ANNEALING LINES.

These furnaces are used in galvanizing lines (CGLs) and continuous annealing lines (CALs), and can be radiant tube heated or gas-fired with a muffle.

Well-established technologies have been refined by EBNER for both the annealing furnaces and the coolers - e.g. the patented HICON® jet cooler.

All furnace types feature only components manufactured by or approved by EBNER. This includes burners, radiant tubes, control valves for the combustion system, heat-resistant material for muffles, hot bridles, insulating materials etc.

Applications:

  • Furnaces for continuous galvanizing lines (CGL) for automotive steel strip up to 2100 mm wide
  • Continuous annealing lines (CAL) for automotive steel strip up to 2100 mm wide
  • Continuous annealing lines (CAL) for metallically-coated strip

Mini CAL (horizontal) to anneal deep-drawing grades, polyphase steels and special grades

One annealing line - three technologies

  • Recrystallization
  • Dual-phase cycles
  • Normalizing

Thanks to hydrogen cooling technology, cooling gradients of 100 to 150 K/s are achieved while heat treating polyphase steels and IF grades.

Strip with a max. width of up to 800 mm for a variety of applications in the white goods, electrical and automotive industries can be annealed in the horizontal facilities at throughputs up to 1.3 t/h.

Continuous annealing lines

Galvanizing line
Hot-dip galvanizing facility
CGL
CGL furnace
CAL
CAL furnace

Copyright ©2018 by EBNER member of AUSTRIAN CHAMBER OF COMMERCE


Industrieofenbau GmbH

Bearer of the
Austrian State Coat of Arms

Industrieofenbau - Bearer of the Austrian State Coat of Arms

Copyright ©2018 by EBNER member of AUSTRIAN CHAMBER OF COMMERCE